robotics Archives - OmArTronics

IR remote controls an LED on D8 and a servo on D9 to open the door—Elegoo/Arduino Uno with KY-022 receiver.

Arduino IR Remote LED: Then Add a Servo Door (DIY Guide)

Post author:omartronics
Post published:6. September 2025
Post category:Actuators Arduino with Sensors and Actuators robotics Sensors
Post comments:0 Comments

In this project, we will build an Arduino IR remote LED controller. First, we will toggle an LED with the kit’s IR remote. Then, we will extend this setup to…

Password door lock built with Arduino Uno, LCD, keypad, and SG90 servo motor.

Arduino Password Door Lock with Keypad and LCD

Post author:omartronics
Post published:24. August 2025
Post category:Actuators Arduino with Sensors and Actuators robotics Sensors
Post comments:0 Comments

https://youtu.be/FmuWFEiHg9YIn this tutorial, we will build an Arduino Password Door Lock using a 4x4 keypad, a 16x2 LCD with I2C module, and a small SG90 servo motor. This project demonstrates…

This is the 3D-rendered design of the Arduino path-following robot equipped with TCS34725 sensors for accurate line tracking.

Building a Line Following Robot with TCS34725 RGB Sensor

Post author:omartronics
Post published:28. December 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:1 Comment

https://youtu.be/rQcefOthMaIIn this tutorial, we'll upgrade the KY-033 line-following robot from the previous tutorial by replacing the KY-033 IR sensor with a TCS34725 RGB sensor. This new approach, combined with PID…

This is the 3D-rendered design of the Arduino path-following robot equipped with KY-033 sensors for accurate line tracking.

Building a Line Following Robot with KY-033 Sensors for Beginners

Post author:omartronics
Post published:14. December 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:1 Comment

https://youtu.be/bwaEEXmUkrw?si=Rq6xsy1oFgUb7IQOIn this step-by-step tutorial, we'll design, 3D print, assemble and program a line-following robot using the KY-033 IR sensors. This robot can autonomously follow a predefined white line on a…

The OmObiArm: A mobile robot featuring an integrated robotic arm, controlled via Bluetooth for versatile robotics applications.

OmObiArm: Building a Mobile Robot with an Integrated Robotic Arm Using Arduino and Bluetooth Control

Post author:omartronics
Post published:22. November 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:1 Comment

https://youtu.be/KSroUz1tMO0In this tutorial, we’ll learn how to build the mobile robot arm OmObiArm, a Bluetooth-controlled robot with a robotic arm, both controlled wirelessly via a custom Android app. The OmObiArm…

Building the Bluetooth-Controlled Robot Car OmObi with Arduino, HC-05, and Adafruit Motor Shield

Post author:omartronics
Post published:19. November 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:1 Comment

https://youtu.be/ED2uPoxdGDMIn this Arduino Bluetooth tutorial, we will build a Bluetooth-controlled car using Arduino Uno, HC-05 Bluetooth module, and the Adafruit Motor Shield. This project covers everything from assembling the car’s…

Demonstrating a DIY robotic arm equipped with servo motors.

DIY 6-DOF Robotic Arm with Bluetooth Control: Design, Build, and Program

Post author:omartronics
Post published:3. September 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics
Post comments:Comments

https://youtu.be/op7UYowvfX0In our previous project, we built a DIY 6-DOF robotic arm with potentiometers, initially operated by connecting the potentiometers directly to an Arduino. This setup allowed us to manually control…

Read more about the article Building an Advanced Autonomous and Remote-Controlled Robot Car with Arduino Mega, Ultrasonic Sensors, and Adafruit Motor Shield

advanced autonomous and Bluetooth-controlled car with Arduino Mega, ultrasonic sensors, and Adafruit Motor Shield.

Building an Advanced Autonomous and Remote-Controlled Robot Car with Arduino Mega, Ultrasonic Sensors, and Adafruit Motor Shield

Post author:omartronics
Post published:13. July 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:0 Comments

https://youtu.be/Q5qgsgQIZOwIn this tutorial, we will guide you on building an advanced autonomous and Bluetooth-controlled car with Arduino Mega, HC-05 Bluetooth module, multiple ultrasonic sensors, and the Adafruit Motor Shield. This…

This robot car was built using an Arduino Uno, an Adafruit Motor Shield, and an HC-05 Bluetooth module. The image shows the control app displayed on a tablet in the background.

Building a Bluetooth-Controlled Robot Car with Arduino, HC-05, and Adafruit Motor Shield

Post author:omartronics
Post published:2. July 2024
Post category:Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:1 Comment

https://youtu.be/VA0lXC-1_4UIn this Arduino Bluetooth tutorial, we will build a Bluetooth-controlled car using Arduino Uno, HC-05 Bluetooth module, and the Adafruit Motor Shield. This project covers everything from assembling the car’s…

An Arduino-based robot car equipped with a servo motor and ultrasonic sensor.

Building an Obstacle-Avoiding Robot Car with Arduino, L293D Motor Shield, Servo Motor, and Ultrasonic Sensor

Post author:omartronics
Post published:9. June 2024
Post category:Actuators Arduino with Sensors and Actuators Build Your Robot (for Beginners)robotics Sensors
Post comments:1 Comment

https://youtu.be/j9lCIa1jRCcIn this guide, we will build an obstacle avoiding car using arduino. This project involves using an L293D motor shield, a servo motor, and an ultrasonic sensor. The robot car…